After a hot bath or shower, mirrors tend to steam up which means having to wait for the mirror to clear to use it. With a harmoni demister pad, no longer must you wait around for condensation to clear. Heater Shops mirror demisters are a great solution as they turn your normal mirror into a heated mirror which will prevent condensation from forming. They come in a wide range of shapes and sizes so are sure to fit any type of mirror you have. They are easy to install and are hidden from view as they stick behind the mirror. Demister pads are manufactured in the UK to the highest standards and tested under very strict quality controls by Demista.
An ultra thin self-adhesive heating pad that fits inconspicuously behind virtually any mirror keeping the mirror completely mist free. The Demister heated mirror demista pad represents the most up-to-date standards in technology giving a high degree of temperature stability, with complete resistance to moisture, vibration, shock, dust and ageing.
Why choose Demista heated mirror pads?
- Simple to fit
- Maintenance free
- Complete resistance to moisture
- Approved to international standards
- Manufactured in the UK
- 10 year warranty against any manufacturing fault, providing the demista is fitted strictly in accordance with instructions supplied.
Mirror Demister Pad Sizes
There are over 40 different demista pad sizes for you to choose from, starting from as small as 150mm x 274mm. Our largest size available is 700mm x 1970mm however you can use more than one mirror demister to cover larger mirrors. Each mirror demister pad provides a consistent heat distribution which allows the mirror to heat up and prevent fog forming on the surface.
Easy to Install
A mirror heat pad from Heater Shop is easy to install. Each pad is flat and has a self-adhesive backing which allows you to simply peel and stick to the mirror. The Demister is an ultra-thin self-adhesive heating pad that fits inconspicuously behind virtually any mirror keeping the mirror completely mist free. Using a proven technology, the demister pad represents the most up-to-date standards in technology giving a high degree of temperature stability, with complete resistance to moisture, vibration, shock, dust, and ageing. The pad simply wires into the bathroom lighting in accordance with instructions. Demisters can also be connected to the fan or a separate switch if preferred.
Each product comes with your heating pad, fitting instructions, and a 10-year warranty. To install the pad, you will need the following:
- Tape measure drawing pad and pencil
- Cable strippers and screwdriver
- Resistance tester (multimeter)
Frequently asked questions
Can I cut a mirror demister pad?
The Demista heated mirror demister pad must not be cut or pierced in any way, as this will damage the insulation rendering it dangerous. Demista pads come in a variety of different sizes allowing you to to fit to almost any mirror.
If you are unsure if which size to purchase, please give us a call.
Do I need an electrician to install my mirror demister?
Any electrical connections must be made by a qualified electrician to comply with current wiring regulations.
Demista products should be connected to the lighting circuit so that it is activated when the light is switched on, or to a separate switch if preferred. The circuit must be protected by a 5 amp fuse or circuit breaker at the distribution board. The wiring to Demista products must incorporate an all pole disconnection.
All Demista mirror pads come with a detailed installation guide.
Do you supply mirror demisters suitable for large mirrors?
Not only do we offer a large range of different Demista sizes to suit your needs, but you can use multiple pads on any mirror too.
(Please Note: Several Pads fitted to a single mirror should be wired in parallel. Care must be taken to ensure that the power supply is sufficient to take the load. Pads must not overlap as this could cause hotspots and possible damage to the mirror.)
How do mirror Demista pads work?
The Demista pad is a simple efficient, ultra slim heating pad which fits inconspicuously behind most bathroom mirrors - existing or newly installed. Once fitted, the mirror will never steam up in and around the area of the pad.
Demista is manufactured in the UK specifically for mirrors and has been developed from a unique heating material which has been proven for over 30 years. It represents the most up to date standard of technology giving complete temperature stability with resistance to moisture, vibration, shock, dust and ageing.