Elnur Indirect Unvented Cylinder IND150 150L
Quick Find: 8468
Part Code: IND150
This item was discontinued on 25th July, 2018.
Discontinued by Elnur
|Range||Elnur Gabarron ASLNORELNIND|
Unvented cylinders for use with a conventional boiler or electric power
The Gabarron indirect model is supplied with two immersions for off-peak and on-peak use for the IND250 & IND300 litre model (the IND90, IND120, IND150, IND180 and IND210 model only have an on-peak immersion). Therefore, the store of water in the cylinder can be heated utilising the off-peak electricity, making the unit extremely efficient.
These cylinders are ultimately lightweight, easy to install answer for electric hot water options. The immersion heater(s) must be connected to the supply through a double pole linked isolating switch with a minimum breaking capacity of 13A. All tappings are within a 90° segment to make installation easier.
All models have a temperature and pressure relief valve factory set at 6 bar and 92-95°C.
The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water.
The coils corrugated design gives you much faster re-heat times than can be achieved with plain tube coils.
|Dimensions||1120 x 550 mm|
|Expanison Vessel Size||18 Litres|
|Pressure Regulator||3 Bar|
|Standing Losses||1.27 kWhr/24hr|
|Warranty (Immersion Heater & Fittings)||2 Years|
|Weight (Empty)||26 Kg|
|Weight (Full)||176 Kg|