Gledhill StainlessLite Plus Unvented 180 Litre Cylinder - In-Direct Connection
Unvented cylinder for use with a conventional boiler and electric
Available in 8 sizes ranging from 90 litres to 400 litres, with the largest model capable of satisfying the hot water demands of a property with 3 bathrooms and 3 separate shower rooms.
The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils.
All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees Celsius.
Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.
Technical specifications
Brand | Gledhill |
---|---|
Capacity | 180 L |
Diameter | 550 mm |
Direct or Indirect | Indirect |
Electric Heater Type | Water Cylinders |
Erp rating | B |
Heat Pump | No |
Heat up time | 30 min |
Height | 1306 mm |
IP Rating | IPX4 |
Material | Stainless steel |
Number of Immersions | 1 |
Orientation | Vertical |
Secondary return | No |
Vented or Unvented | Unvented |
Weight (Empty) | 30 Kg |
Weight (Full) | 208 Kg |
Product options
Product downloads
Spread the Cost
with our flexible finance plans
- No deposit required
- Choice of simple payment options
- Easy, quick application
- Instant decision