Elnur Indirect Water Cylinders

25 Year Warranty
Elnur Indirect Water Cylinders
Elnur Indirect Water Cylinders
Elnur
ModelCapacityHeightPrice
Elnur Indirect Unvented Cylinder IND300 300LIND300
QF #: 8472
300 L1992 mm
Discontinued
Capacity300 L
Height1992 mm
Elnur Indirect Unvented Cylinder IND250 250LIND250
QF #: 8471
250 L1745 mm
Discontinued
Capacity250 L
Height1745 mm
Elnur Indirect Unvented Cylinder IND200 200LIND210
QF #: 8470
200 L1495 mm
Discontinued
Capacity200 L
Height1495 mm
Elnur Indirect Unvented Cylinder IND170 170LIND180
QF #: 8469
170 L1305 mm
Discontinued
Capacity170 L
Height1305 mm
Elnur Indirect Unvented Cylinder IND150 150LIND150
QF #: 8468
150 L1120 mm
Discontinued
Capacity150 L
Height1120 mm
Elnur Indirect Unvented Cylinder IND120 120LIND120
QF #: 8467
120 L930 mm
Discontinued
Capacity120 L
Height930 mm
Elnur Indirect Unvented Cylinder IND90 90LIND90
QF #: 8466
90 L745 mm
Discontinued
Capacity90 L
Height745 mm
Heater Shop

The Elnur Gabarron indirect water cylinder is supplied with two immersions for off-peak and on-peak use for the IND250 & IND300 litre model (the IND90, IND120, IND150, IND180 and IND210 model only have an on-peak immersion). Therefore, the store of water in the cylinder can be heated utilising the off-peak electricity, making the unit extremely efficient.

Why choose an Elnur ALSNORELNIND unvented indirect water cylinder?

  • Supplied with two immersions for off-peak and on-peak use for the IND250 & IND300 litre model (the IND90, IND120, IND150, IND180 and IND210 model only have an on-peak immersion).
  • The cylinders are ultimately lightweight and an easy-to-install answer for electric hot water options.
  • Latest HCFC free Environfoam insulation with an ozone deletion potential of zero.
  • Easy installation with all tappings within a 90° segment.
  • All models have a temperature and pressure relief valve factory set at 6 bar and 92-95°C.
  • The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water.
  • The coils corrugated design gives you much faster re-heat times than can be achieved with plain tube coils.

* Please note that Elnur Indirect water cylinders do not come with a flex

The Elnur Gabarron unvented water cylinder range incorporates high flow rate controls, ideal for multi bathroom homes where baths fill very quickly.

These cylinders are a lightweight, easy to install answer for electric hot water options. The immersion heater(s) must be connected to the supply through a double pole linked isolating switch with a minimum breaking capacity of 13A. All tappings are within a 90° segment to make installation easier.

All models have a temperature and pressure relief valve factory set at 6 bar and 92-95°C. Although Elnur water cylinders are tested in the factory to a full 12 bar which is four times the normal working pressure.