Herschel Advantage IR4 Workspace Heater

Shop all Industrial Heating

Herschel Advantage IR4 Workspace Heater
Herschel Advantage IR4 Workspace Heater
Herschel Advantage IR4 Workspace Heater
Product CodePriceStockQty
Herschel Advantage IRP4 Industrial HeaterIRP4
QF #: 8403
ex VATinc VAT

The Advantage IRP4 Industrial heater consists of 4 high-emission ceramic heating elements mounted in a directional reflective unit. It is designed to gently warm people indoors using infrared radiated heat. Infrared heat is emitted from the hot surface of the ceramic heaters and warms the body directly without heating the air in between. As soon as the heater is switched on the ceramic elements start to warm up and full operating temperature is achieved in less than 10 minutes. As the energy produced is all in the low medium to far infrared region (not visible), there is no light emitted from the heater, but elements can produce a very faint orange glow.
The Herschel IR must be located in a position to allow for proper and efficient use but one that ensures hot parts are not touched accidentally. The unit is designed to be mounted or suspended from a ceiling. The recommended height for the mounting is 3.5m to 4.0m from ground level and a minimum 125mm from the ceiling and 1.5m from the nearest wall. The heating elements are at a fixed downward angle to ensure maximum heat arc from this installation height.

The Herschel IRP4 must not be installed at a height of less than 3.5m . Consideration should be given to any temporary or occasional additions such as stages or platforms, and the height should be adjusted accordingly. The Herschel IRP4 should be firmly and permanently attached to the ceiling directly via its own brackets or via appropriate suspension cables.

Spread the Cost

with our flexible finance plans
  • No deposit required
  • Choice of simple payment options
  • Easy, quick application
  • Instant decision